There are many ways to install the shutter, but if you do not know the correct opening method, the shutter will not work properly. Now let’s see how to open the shutter correctly!
1: Opening mode of shutter
There are many ways to open the wood plantation shutters, but the most common way is through screwdriver and shutter clamp. First, remove the screws on the shutter; Then, take out the springs, bearings or other things inside and reinstall them; Finally, put the spring into a hollow box and pop the shutter out of the window. If you need to disassemble the whole glass window, you can disassemble it first and then assemble it. It is best to oil and dry it before use.
2: How to remove the shutter? It’s very practical to teach you how to open it correctly!
Louver is an indoor decoration, which can be used for indoor ventilation and lighting. In order to facilitate people’s access, a window is usually installed to regulate the indoor and outdoor air circulation. So, how to remove the shutter? First of all, the size of the louver should be adjusted according to the size and needs of the room. Generally, the height of each floor is within 3.6 meters, so the height of the louver should not be less than 2.4 meters; Secondly, the surface of the shutter should be flat and smooth without any scratch or bulge; Finally, the disassembly should start from the top and work from top to bottom to prevent damage to the glass surface.
If you want to install the shutter yourself, it’s very simple! Just follow the steps above. These methods are very simple. You can learn them with a little time.
1: Method of installing shutter
Method 1: First of all, you can learn how to install the louver through the official website of louver or consult local professionals. Before proceeding to the first step, please make sure that you have read the relevant articles and understood the matters needing attention during the installation process. If you don’t know what to do, please don’t worry. We will try our best to help you. Method 2: The next thing to do is to select a suitable installation location. Louvers are usually suspended, so if you don’t have enough space to install them, there will be some problems. In addition, if you want to keep it well ventilated, you must also ensure that the surrounding environment is cool and dry. Method 3: The last step is to complete the installation. If you are familiar with louvers, you may complete the installation work without too much worry. Just follow the steps correctly.
2: How to use the shutter
Louver is a kind of common indoor window, which is usually used for shading sunlight, ventilation and ventilation. The installed shutter can effectively block the sunlight, make the room brighter and cooler, and also better regulate the air flow and improve the living experience. To use the shutter, you only need to open a small hole in the window. Insert a thin and long transparent straw into the window, and then blow down hard to form a cone-shaped hood, and then slowly rotate to open the air outlet. The shutter can not only protect the sun and rain, but also adjust the temperature to create a comfortable home environment. If you want to know more about how to use blinds, please follow our official account: “Story of the Building”, and we will answer your questions about blinds.
3: Precautions
Louver is a common window, which can make the room bright after installation. After installation, you need to use it to maintain air circulation and prevent air pollution. The following will describe how to install the shutter correctly: 1. First, ensure good indoor ventilation. If you have two or more windows in your home, smokeless and tasteless curtains are recommended. This can not only improve the air quality, but also avoid the noise interference caused by window opening. 2. Secondly, we should confirm whether the doors and windows are secure. Check whether the gap between the door and window is large enough to ensure that it will not scratch the wall or floor. 3. Finally, when installing the shutter, please pay attention to the safety issues. If you are not sure of its safety, do not install it near the children’s activity area to avoid accidents. 4. After installation, dust shall be cleaned and clean louvers shall be replaced in time.
I believe that after reading this article, you already know how to install the shutter! If you have any questions, please leave a message below.